产品目录

联系方式

联系人:业务部
电话:0538-8129051
邮箱:service@meids123.com
产品展示当前位置:首页 >> 产品展示 >> 其它开关元件 >> 正文
暂无图片

供应DSHP3位拨码开关贴片/插件

所属目录:其它开关元件

搜索关键字:供应DSHP3位拨码开关贴片/插件

信息简介:供应DSHP3位拨码开关贴片/插件

详细信息:
“供应DSHP3位拨码开关贴片/插件”参数说明
是否有现货: 认证: CE
类型: 拨码开关 型号: DSHP03TSGER
规格: 1.27mm脚距 商标: KE
包装: IC管装 脚距: 1.27mm
库存情况: 长期备库存 寿命测试: 3000
产量:
“供应DSHP3位拨码开关贴片/插件”详细介绍
DSHP Series ? ?
1.27mm ?Half-Pitch DIP SW
Switch Operation and Taping
1. Use Tweezers or ball point pen for operation
2. Flux cleaning should be done without removing the tape
3.If the Tape is removed ,it adhered less than before when it Is placed back on,possibly causing ?flux inflow.
4. Sealed switches withstand aqueous,detergent and isopropyl alcohol washing .
Environmental TEST
Cold Resistance Test
Switches under temperature at - 40℃ ±2℃ for 96 hours
Dry Heat Resistance Test
Switches under temperature at 85℃ ±2℃for 96 hours.
Humidity Test
Per MIL-STD- 202F,Method 103B Test Condition B:
There shall be no evidence of corrosion and the insulation resistance shall be no less than 100 ? megaohms
Vibration Test:
Per MI-STD- 202F,Method204 D,Test Condition A:
There shall be no opening of closed contacts or closing of open contacts in excess of 10 ?microseconds.
Shock Test:
Per MIL-STD- 202F,Method 213B ,Test Condition A:
There shall be no opening of closed contacts or closing of open contacts in excess of 10 microsecond.
Thermal Shock Test:
Per MIL-STD- 202F,Method 107G,Test Condition A:
There shall be no evidence of physical damage or permanent change in electrical characteristics .
Salt-Spray Test
Per MIL -STD - 202 F,Method 101D,Test Condition B :
There are under 35℃ ±2℃ ?in temperature and 5±1% salt-water concentration for 48±1 ? hour.
信息编辑:泰安广督实业有限公司   字号:
上一条:供应DSHP6位拨码开关贴片/插件 下一条:供应DSHP2位拨码开关贴片/插件